Fixes reconnection issues on Windows

[michaelwschultz]

Give this build a shot. I've updated Go as well as the dependencies and improved connection / re-connection issues on Windows. This has solved my issues as well as the dreaded "stops working after my computer goes to sleep".

View 0.9.11 build

Be sure to star my repo to stay-up-to date with changes.

Cheers 🥂

[cavemancomputers]

Well thank you that solved all of the issuesI was having immediately. Was trying this as my first arduino project and I was becoming discouraged after over an hour of troubleshooting. So sincerely thank you for updating this.

[michaelwschultz]

@cavemancomputers awesome! So glad to hear it fixed your issues, Feel free to post here again if you run into something else. So glad you got it working. I've been in that position before. Hardware is super fun, but can be really frustrating when the software just won't work. Hope you continue tinkering. Good luck!

[ZeroedByte]

Thank you so much for this! I've been having nothing but issues lately then finally, zero windows control but the arduino monitor was showing fine. THIS FIXED IT! 🙏

[michaelwschultz]

No problem! I'm going to try and keep my fork up to date. So follow it if you want to know about updates down the road.

[Enzi2]

Hey, I was wondering: I tried this updated version which works but the volume reacts very delayed. With the original outdated one the volume changes near realtime when turning the knobs. What could be the reason for this?
How could i possibly make it run smooth?

Thanks in advance!

[michaelwschultz]

Hey, I was wondering: I tried this updated version which works but the volume reacts very delayed. With the original outdated one the volume changes near realtime when turning the knobs. What could be the reason for this?
How could i possibly make it run smooth?

Thanks in advance!

I'll need a bit more info on your hardware. Sounds like you're using rotary pot instead of a linear pot. I have linear pots so I haven't tested the other style. Let me see if I can't get something set up and tested in the next few days. I can't think of a reason off the top of my head that this would be different, but I'm happy to look into it.

[Enzi2]

Hey, I was wondering: I tried this updated version which works but the volume reacts very delayed. With the original outdated one the volume changes near realtime when turning the knobs. What could be the reason for this?
How could i possibly make it run smooth?
Thanks in advance!

I'll need a bit more info on your hardware. Sounds like you're using rotary pot instead of a linear pot. I have linear pots so I haven't tested the other style. Let me see if I can't get something set up and tested in the next few days. I can't think of a reason off the top of my head that this would be different, but I'm happy to look into it.

I would really appreciate it, im not 100% sure which Hardware info i should give so ill just say:
-Windows 11
-Arduino nano ATMEGA328P (please let me know if I should add other info)
-5 Rotary WH148 Potentiometers 10K

If there is anything I can add or any ways i can help out please let me know.

[stefzouille]

big thx men !!