Lack of Windows executables

[G0MJW]

Lime's documentation says to use LimesuiteNG but there don't seem to be any windows executables?

[9600]

Which LimeSDR board are you using? If it's LimeSDR XTRX, just to note that the PCIe driver has not been ported to Windows yet, so it's only supported on Linux at present.

[G0MJW]

I got an original Lime Mini 1.2e from a silent key sale – unfortunately, it appears it is dead. As I could not speak to it in Windows I managed to load the programmes into Linux Mint and it was equally uncommunicative but more helpful error messages, basically saying no data received by the USB chip from the FPGA. I then tried to speak to the FPGA it with JTAG but without success. No data from the FPGA, the chip could not be identified. Mike From: Andrew Back ***@***.***> Sent: 28 September 2025 10:41 To: myriadrf/LimeSuiteNG ***@***.***> Cc: G0MJW ***@***.***>; Author ***@***.***> Subject: Re: [myriadrf/LimeSuiteNG] Lack of Windows executables (Issue #149) <https://avatars.githubusercontent.com/u/233314?s=20&v=4> 9600 left a comment (myriadrf/LimeSuiteNG#149) <#149 (comment)> Which LimeSDR board are you using? If it's LimeSDR XTRX, just to note that the PCIe driver has not been ported to Windows yet, so it's only supported on Linux at present. — Reply to this email directly, view it on GitHub <#149 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGKF7UQXQCSQJPGK6UQB5ZL3U6UKLAVCNFSM6AAAAACHVFUJMSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGNBSG4YTINRRGA> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGKF7UTOFUB7EGL3YKL6SSD3U6UKLA5CNFSM6AAAAACHVFUJMSWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTWHHXDPE.gif> Message ID: ***@***.*** ***@***.***> >

[9600]

Thanks.

With the original LimeSDR Mini you can use either classic Lime Suite or Lime Suite NG. Though the former will be better tested with that hardware, as the focus with NG has been mostly on more recent boards and so Mini 1.0 won't be as well tested.

With classic Lime Suite you can run LimeQuickTest to test the hardware. The best place for debugging such issues is the forums and if perhaps you could post the output there.

https://discourse.myriadrf.org

Then a colleague can take a look.