WebClientMulti_SSL.ino

/****************************************************************************************************************************
  WebClientMulti_SSL.ino - Dead simple SSL WebClient for Ethernet shields

  EthernetWebServer_SSL is a library for the Ethernet shields to run WebServer and Client with/without SSL

  Use SSLClient Library code from https://github.com/OPEnSLab-OSU/SSLClient

  Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer_SSL
 *****************************************************************************************************************************/

// This sketch connects to SSL websites (https://www.arduino.cc/asciilogo.txt) and (https://www.cloudflare.com/cdn-cgi/trace)
// Generate trustachors.h at https://openslab-osu.github.io/bearssl-certificate-utility/

#include "defines.h"

// You must have SSL Certificates here
#include "trustanchors.h"

// the two domains we want to query
char server1[] = "www.arduino.cc";
char server2[] = "www.cloudflare.com";
// and the queries we want to send to them
char query1[] = "GET /asciilogo.txt HTTP/1.1";
char query2[] = "GET /cdn-cgi/trace HTTP/1.1";

const uint16_t  server_port = 443;

// Initialize the SSL client library
// Arguments: EthernetClient, our trust anchors
EthernetClient    client;
EthernetSSLClient sslClient(client, TAs, (size_t)TAs_NUM);

// Variables to measure the speed
unsigned long beginMicros, endMicros;
unsigned long byteCount = 0;
unsigned long loopCount = 0;

bool printWebData = true;  // set to false for better speed measurement

void connectSSL()
{
  static bool r = true;
  // cycle the server we want to connect to back and forth
  char* server;
  char* query;

  if (r)
  {
    server  = server1;
    query   = query1;
  }
  else
  {
    server  = server2;
    query   = query2;
  }

  r = !r;

  Serial.print("Connecting to ");
  Serial.print(server);
  Serial.println("...");

  // if you get a connection, report back via serial:
  auto start = millis();

  if (sslClient.connect(server, server_port))
  {
    auto time = millis() - start;

    Serial.print("Took: ");
    Serial.println(time);

    // Make a HTTP request:
    sslClient.println(query);
    sslClient.println("User-Agent: SSLClientOverEthernet");
    sslClient.print("Host: ");
    sslClient.println(server);
    sslClient.println("Connection: close");
    sslClient.println();
    sslClient.flush();
  }
  else
  {
    // if you didn't get a connection to the server:
    Serial.println("connection failed");
  }

  beginMicros = micros();
}

void initEthernet()
{
#if USE_ETHERNET_PORTENTA_H7
  ET_LOGWARN(F("======== USE_PORTENTA_H7_ETHERNET ========"));
#elif USE_NATIVE_ETHERNET
  ET_LOGWARN(F("======== USE_NATIVE_ETHERNET ========"));
#elif USE_ETHERNET_GENERIC
  ET_LOGWARN(F("=========== USE_ETHERNET_GENERIC ==========="));
#elif USE_ETHERNET_ESP8266
  ET_LOGWARN(F("=========== USE_ETHERNET_ESP8266 ==========="));
#elif USE_ETHERNET_ENC
  ET_LOGWARN(F("=========== USE_ETHERNET_ENC ==========="));
#else
  ET_LOGWARN(F("========================="));
#endif

#if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7)

#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
  ET_LOGWARN(F("========================="));
#endif
#else
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
  ET_LOGWARN(F("========================="));
#endif

#if defined(ESP8266)
  // For ESP8266, change for other boards if necessary
#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   D2    // For ESP8266
#endif

  ET_LOGWARN1(F("ESP8266 setCsPin:"), USE_THIS_SS_PIN);

#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // For ESP8266
  // Pin                D0(GPIO16)    D1(GPIO5)    D2(GPIO4)    D3(GPIO0)    D4(GPIO2)    D8
  // EthernetGeneric    X                 X            X            X            X        0
  // Ethernet_ESP8266   0                 0            0            0            0        0
  // D2 is safe to used for Ethernet, Ethernet2, Ethernet3, EthernetLarge libs
  // Must use library patch for Ethernet, EthernetLarge libraries
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#elif defined(ESP32)

  // You can use Ethernet.init(pin) to configure the CS pin
  //Ethernet.init(10);  // Most Arduino shields
  //Ethernet.init(5);   // MKR ETH shield
  //Ethernet.init(0);   // Teensy 2.0
  //Ethernet.init(20);  // Teensy++ 2.0
  //Ethernet.init(15);  // ESP8266 with Adafruit Featherwing Ethernet
  //Ethernet.init(33);  // ESP32 with Adafruit Featherwing Ethernet

#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   5   //22    // For ESP32
#endif

  ET_LOGWARN1(F("ESP32 setCsPin:"), USE_THIS_SS_PIN);

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // Must use library patch for Ethernet, EthernetLarge libraries
  // ESP32 => GPIO2,4,5,13,15,21,22 OK with Ethernet, Ethernet2, EthernetLarge
  // ESP32 => GPIO2,4,5,15,21,22 OK with Ethernet3

  //Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#elif ETHERNET_USE_RPIPICO

  pinMode(USE_THIS_SS_PIN, OUTPUT);
  digitalWrite(USE_THIS_SS_PIN, HIGH);

  // ETHERNET_USE_RPIPICO, use default SS = 5 or 17
#ifndef USE_THIS_SS_PIN
#if defined(ARDUINO_ARCH_MBED)
#define USE_THIS_SS_PIN   5     // For Arduino Mbed core
#else
#define USE_THIS_SS_PIN   17    // For E.Philhower core
#endif
#endif

  ET_LOGWARN1(F("RPIPICO setCsPin:"), USE_THIS_SS_PIN);

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // Must use library patch for Ethernet, EthernetLarge libraries
  // For RPI Pico using Arduino Mbed RP2040 core
  // SCK: GPIO2,  MOSI: GPIO3, MISO: GPIO4, SS/CS: GPIO5
  // For RPI Pico using E. Philhower RP2040 core
  // SCK: GPIO18,  MOSI: GPIO19, MISO: GPIO16, SS/CS: GPIO17
  // Default pin 5/17 to SS/CS

  //Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (USE_THIS_SS_PIN);

#endif    //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#else   //defined(ESP8266)
  // unknown board, do nothing, use default SS = 10
#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   10    // For other boards
#endif

#if defined(BOARD_NAME)
  ET_LOGWARN3(F("Board :"), BOARD_NAME, F(", setCsPin:"), USE_THIS_SS_PIN);
#else
  ET_LOGWARN1(F("Unknown board setCsPin:"), USE_THIS_SS_PIN);
#endif

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC || USE_NATIVE_ETHERNET )
  // Must use library patch for Ethernet, Ethernet2, EthernetLarge libraries

  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#endif    // defined(ESP8266)

#endif    // #if !(USE_NATIVE_ETHERNET)

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;
  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  Ethernet.begin(mac[index]);

#if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7)
  ET_LOGWARN(F("========================="));

#if defined( ESP32 )
  // Just info to know how to connect correctly
  // To change for other SPI
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  PIN_SCK);
  ET_LOGWARN1(F("SS:"),   PIN_SS);
#else
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
#else
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
#endif
#endif

  ET_LOGWARN(F("========================="));

#elif (USE_ETHERNET_PORTENTA_H7)

  if (Ethernet.hardwareStatus() == EthernetNoHardware)
  {
    Serial.println("No Ethernet found. Stay here forever");

    while (true)
    {
      delay(1); // do nothing, no point running without Ethernet hardware
    }
  }

  if (Ethernet.linkStatus() == LinkOFF)
  {
    Serial.println("Not connected Ethernet cable");
  }

#endif

  Serial.print(F("Using mac index = "));
  Serial.println(index);

  Serial.print(F("Connected! IP address: "));
  Serial.println(Ethernet.localIP());
}

void setup()
{
  // Open serial communications and wait for port to open:
  Serial.begin(115200);

  while (!Serial);

  Serial.print("\nStart WebClientMulti_SSL on " + String(BOARD_NAME));
  Serial.println(" with " + String(SHIELD_TYPE));
  Serial.println(ETHERNET_WEBSERVER_SSL_VERSION);

  initEthernet();

  // give the Ethernet shield a second to initialize:
  delay(2000);

  // connect!
  connectSSL();
}

void loop()
{
  // if there are incoming bytes available
  // from the server, read them and print them:
  int len = sslClient.available();

  if (len > 0)
  {
    byte buffer[80];

    if (len > 80)
      len = 80;

    sslClient.read(buffer, len);

    if (printWebData)
    {
      Serial.write(buffer, len); // show in the serial monitor (slows some boards)
    }

    byteCount = byteCount + len;
  }

  // if the server's disconnected, stop the sslClient:
  if (!sslClient.connected())
  {
    endMicros = micros();

    Serial.println();
    Serial.println("Disconnecting.");
    sslClient.stop();

    Serial.print("LoopCount ");
    Serial.print(++loopCount);

    Serial.print(", Received ");
    Serial.print(byteCount);
    Serial.print(" bytes in ");
    float seconds = (float)(endMicros - beginMicros) / 1000000.0;
    Serial.print(seconds, 4);
    float rate = (float)byteCount / seconds / 1000.0;
    Serial.print(" s, rate = ");
    Serial.print(rate);
    Serial.print(" kbytes/second");
    Serial.println();

    // Reset
    byteCount = 0;

    //quick delay
    delay(10000);
    // connect again!
    connectSSL();
  }
}